What’s new on the B2B Market?

Refine my search:
Electricfor, a specialist in the design and manufacture of  electric heating elements, has designed and manufactured a GCP group compressed air heater with control panel for CIMO, a company located in Switzerland.

HOW USEFUL IS A GCP HEATER?

The primary function of a GCP heater is to heat any air or fluid. This project involves compressed air with an outlet temperature of 175 °C. With an output of 115 KW in two stages, the GCP heater is completely made of AISI316L stainless steel and internally insulated with a mineral blanket.

The control panel included is managed by a Siemens PLC, model Simatic S7, whose power is regulated by a thyristor.

Electricfor's team designated for this project has personally supervised the start-up of the heater at CIMO's facilities in Switzerland. CIMO is a joint venture between BASF and Sygenta, which produces cleaning products for polymers whose main use is in the automotive and agronomy sectors.

For further information about Electricfor  air compressed heaters, do not hesitate to contact its sales department.
Show More Show less
Pay attention to AQURUN, an aqua summer shoe with good value

Jun 26 2019

New product

Pay attention to AQURUN, an aqua summer shoe with good value

Date: June 26, 2019 3:00 PM

“We now have independent offices in the United States, and we're at a prime time by expanding our markets to Mexico and other North and South America. We will develop new product lines without settling on the launch of Aqua Shoes 'Aquan,' and develop them into the best global waterproofing products brand. ”

Based on 13 years of waterproof housing know-how, Dicapak introduced 'Dicapak', which led the existing waterproof case, 'Dicapak Action' that covers outdoor activities. I am getting it. DICAPAC is growing into a global brand by exporting to more than 60 countries through local technology in Korea.

syncopation...

In addition to Aquarun, Dicapak is also presenting Aqua Sox 'AQUWALK' which considers dripping, rapid drying and burning. Akuwalk is a skinsock that can be carried around in the cabin, hospital, dormitory, etc. as well as indoor shoes and light sports. AQUWALK said, "AQUWALK is characterized by preventing slip with neoprene outsole compared to general sox, and plans to increase sales network for indoor shoes such as hotels and resorts in the future."
Show More Show less
activebeauty exhibition

Jun 25 2019

Organize an event

activebeauty exhibition

Date: June 25, 2019 3:00 PM

Location: Tokyo

Activebeaty participated exhibition In Tokyo.
This exhibition held on 2019, June ,26 ~ 28.
Show More Show less
The Korea Information and Communication Industry Promotion Agency (KIPA, Director Kim Chang-yong) has selected 30 promising content companies for its "Smart Contents Overseas Advancement Support Project."
Show More Show less
Downloadable CAD Files Now Available

Jun 22 2019

New service

Downloadable CAD Files Now Available

Date: June 22, 2019 5:00 AM

Downloadable CAD files can save time and help engineers in the design process.  For this reason, we offer free CAD 2D and CAD 3D Model files for most of our hinge profiles.

All files are for our 8' long hinges.  Engineers can trim the models to length using their favorite 3D Modeling software.
Show More Show less
ABL Circuits are celebrating World Music Day, also known as Make Music Day. With the UK being at the forefront of Sound & Recording technology and manufacture, we’re ‘hear’ to celebrate some of the ingenious technology that goes into creating and manipulating the best sounds.
ABL has  designed and  manufactured printed circuit boards for some of the best sound engineering companies in the UK and arguably the world. Our customers have supplied audio equipment to some of the biggest concerts, live events, recording studios, theatres and nightclubs, to stars such as Elton John, Ed Sheeran, U2 and the Royal Albert Hall… just to name a few.But what makes a great sound? Well, before you start to even think about acoustics and the final perfect note, you need to start with a great design. ABL  specifically designs the layout of each board with the utmost care and attention; every component location can make a huge difference to how the board works and the quality of sound it can produce.
Once you have a perfectly designed PCB, ABL Circuits will create you a world class circuit board. Most high efficiency PCBs tend to be gold plated, either double sided PTH or multi layer boards. This enables the PCB to cope with very high frequencies, which is a must have for accurate sound reproduction. At ABL Circuits our UK factory strives to create some of the highest quality PCBs in the UK. With our ‘turn key’ service, we can  designmanufactureassemble and box assemble all under one roof.
Show More Show less
Demag KBK Extending Cranes for Optimum Use of Workspace

Jun 19 2019

New product

Demag KBK Extending Cranes for Optimum Use of Workspace

Date: June 19, 2019 11:00 PM

  • Optimum height utilisation
  • For lifting and positioning tasks beyond the crane runway
 
Demag Cranes & Components has added overhung and extending configurations to its KBK Aluline light crane system. Such solutions are designed for applications where there is a requirement to move loads beyond the crane runway span dimension. They enable operators to perform lifting and positioning tasks between pillars and columns or deposit loads in aisles and free areas between assembly zones and lines. Depending on the load capacity, design and profile section size, the range can be extended by up to 3,100 mm. Crane extensions to either side of the track runway span dimension may also be specified, creating an even greater range of crane coverage.
 
Compared with Demag’s conventional KBK crane kit, this configuration has a lower headroom dimension, allowing users to benefit from 120 to 220 mm more hook path, dependent on profile size, for improved utilisation of space below the crane girders. Extending and overhung components may be added easily and quickly to existing KBK installations to improve productivity, without the need to install additional crane runways.
 
The KBK Aluline system is suitable for a wide range of operational requirements in production, assembly and shipping applications. The system is based on aluminium sections and smooth running trolleys. The result is a system that provides the operator with hands-on support for the movement and positioning of loads, improved ergonomics and reduced physical effort for material handling. It also facilitates an increased lifting path for enhanced operation of gantry mounted hoist units.
 
The extension length, maximum load capacity up to 500 kg and the crane girder length can be easily selected when designing KBK crane installations. Systems may be designed by Demag’s dedicated engineering team or user specified via the company’s on-line KBK Designer tool.

Sales Director, Paul Bartlett, stated:
“The KBK lightweight crane system was first introduced over 56 years ago and the fact that it is still used today in a wide variety of workshop and assembly environments is testament to its inherent versatility and efficiency. We have continued to develop the system and this latest innovation will allow us to provide increasingly bespoke material handling solutions for an even broader range of industrial applications.”
Show More Show less
Low Cost Test Solution for Unblended Hot and Cold Water Pipes

Jun 19 2019

New product

Low Cost Test Solution for Unblended Hot and Cold Water Pipes

Date: June 19, 2019 3:30 PM

TME’s Double TC Wall Port is a NEW test accessory for simplifying test and monitoring of unblended hot and cold water temperatures for legionella risk management.
 
TME’s TC Wall Port System already provides a low cost solution for connecting fine-wire temperature sensors/probes to concealed TMVs, crowded calorifier pipes and overhead tanks. The Double Port is a new addition to the system, connecting two pipes from one location to facilitate remote tests on unblended hot and cold water pipes.

How does it work?
The Double TC Wall Port is the same compact size as the single (52 x 52 mm) but houses two thermocouple connection points instead of one, wired to a choice of lengths up to a maximum of 20 meters. Attach the sensors to hot and cold feed pipes and leave them in place. Ongoing tests are easily taken by plugging a thermometer into the wall port without needing to access the pipes directly, delivering an instant, accurate result every time.
 
Low Cost Simplicity
At just £16 for a single wall port or £22.50 for a 1 meter double, installation can be achieved from under £25 per water point, leaving a fast, affordable testing method permanently in place.
 
Will my existing thermometer be compatible?
Any thermocouple input thermometer is compatible but TME recommends its MM2000 or MM2008 with a single plug to plug cable (only one required).
 
Paperless Recording Option
For paperless recording, the TC Wall Port System is compatible with TME’s unique MM7000-2D Barcode Scanning Thermometer.
 
24 Hour Monitoring
TME also supplies TC wall Port compatible WiFi Data Loggers with single or double thermocouple TMELOG1250 or TMELOG1210 offering continuous temperature profiling with email and text alerts plus optional cloud data storage.
 
About TM Electronics
TME is a UK manufacturing company with more than 25 years’ experience, supplying thermometers and temperature sensors for all uses but especially Legionella Risk Management and Food Safety.
 
TME When temperature matters
 
www.tmethermometers.com                   +44 (0)1903 700651                 sales@tmethermometers.com
Show More Show less
“Fritz the Bull” and “Ben the Bear”

Jun 16 2019

Press release

“Fritz the Bull” and “Ben the Bear”

Date: June 16, 2019 10:00 PM

They make a great pair, because together they are the symbol of the ups and downs on the stock exchange. This will make them a perfect eye-catcher for Hermle as a stock corporation in the Hermle showroom in the future. The bull was milled from solid material on a 5-axis machining centre C 650 from an aluminium block (W x L x H 860 x 480 x 530 mm with a weight of 600 kg). The challenge in this complex 5-axis simultaneous machining task is to turn the blank in the working area of the C 650 (X-Y-Z 1050 x 900 x 600 mm) in two axes (interference area 1100 mm) and to swivel and machine it collision-free (swivel range +/-115°). In particular, collision monitoring in interaction with dynamics and milling strategy requires complex specialist knowledge and good programming skills on the part of the operator. After machining, the finished bull weighs 109 kg. Machining took 35 hours and produced 3.5 m3 of chips. The bear, on the other hand, was milled from solid material on a 5-axis machining centre C 42 from a block of black POM (W x L x H 400 x 150 x 230 mm). Polyoxymethylene, POM in short, is a high-molecular thermoplastic plastic. For its high rigidity, low friction coefficient, excellent dimensional stability and thermal stability, it is used as a technical synthetic primarily for precision parts. The bear was programmed using OpenMind. Its structure is based on an STL model which generates a 3D contour from a multitude of triangles. Both workpieces are classical “show parts” and would certainly not be manufactured under economical aspect. However, they impressively showcase the efficiency of the Hermle machining centres.
Show More Show less
participated in CJ Olive market season

Jun 12 2019

Participate in an event

participated in CJ Olive market season

Date: June 12, 2019 3:00 PM

Living brand 'mamaforest' is participated in CJ Olive market season 1, launched kitchen detergent product. 
Show More Show less
Olive Tv - TV Program

Jun 11 2019

Other

Olive Tv - TV Program

Date: June 11, 2019 3:00 PM

Korean celebrity Kim-Nayoung's pick. She is well known for the 'minimalist'.
Please watch 2'40" part. 
Show More Show less
[NEW PRODUCT] ECO DAILY SUN MILK

Jun 10 2019

New product

[NEW PRODUCT] ECO DAILY SUN MILK

Date: June 10, 2019 3:00 PM

[NEW PRODUCT] ECO DAILY SUN MILK

Our physical daily sun milk loaded with anti-dust technique helps defend from harzadous environment in urban life.
- Physical sunscreen for sensitive skins
- Anti-dust Technology
- EWG 1-2 Green grade ingredients
- Excellent skin adhesion
- 7 Suspicious ingredients FREE
- Dermatology test completed

PRODUCT DETAIL :
https://prokcssmedia.blob.core.windows.net/sys-master-images/hfe/hba/9470113677342/eco_daily_sun_milk.pdf
Show More Show less
Medical Design & Manufacturing East Recap

Jun 10 2019

Other

Medical Design & Manufacturing East Recap

Date: June 10, 2019 1:00 PM

Location: NYC

This week, we had the opportunity to attend the  Medical Design & Manufacturing East event in New York City. Medical Design & Manufacturing (MD&M) East is the largest and longest-running medtech event on the east coast. Medical device engineers, R&D managers, and executives from across the Northeast and beyond rely on this event to stay on top of the latest industry advancements, including first looks at innovations yet to hit the market.

I enjoyed the Emerson’s Lunch & Learn session, where Tom Hoover Medical Business Development from Branson at Emerson and Tarick Walton Ultrasonic Global Product Manager for Branson at Emerson shared the news about the
latest technologies and solutions. Emerson’s expertise helps medical manufacturers and OEM’s stay competitive while meeting changing consumer demands by tackling challenges in production, quality, reliability and sustainability.
It was nice to meet our existing customers yesterday at the show such as Keyence and Accumold. While Keyence Mexico is taking advantage of Kompass EasyBusiness tool for prospecting, Accumold is advertising on Kompass for more than 5 years.
Accumold,  is an example of  Booster+ 1000 Guaranteed Clicks service. This package helps penetrate in difficult international markets, where local personal data protection is in effect. Let us be the experts at taking your SEO global.
On the picture: the Accumold Booth at the MDM EAST with Shawn Thibeault, Sr. Sales Engineer and Aaron Johnson, Vice President of Marketing & Customer Strategy.

About Accumold:
Accumold is a high-tech manufacturer of precision micro, small and lead frame injection molded plastic components. Utilizing processes developed from our Micro-Mold(r) technology, we design,
build and produce unique molds and parts efficiently for a variety of markets that include Micro Electronics, Optics and Medical. Like many great start-ups, Accumold  began operations in a rented garage. Their founders discovered there was a growing need to manufacture small and micro injection molded components that went
well-beyond the available molding systems of the day. This discovery led to the invention of our first Micro-Mold(r) platform in 1985
Accumold has traveled all around the world attending trade shows and showing why they are a leader in precision micro, small and lead frame injection molded plastic components. It was nice to see them at MDM EAST show, they next event will be in Germany.
Thank you to the MD&M East team for having us and throwing such a great event. To learn more about how our  Booster program can help you,  contact us!
Show More Show less
Accumold At MD&M East, 2019

Jun 10 2019

Other

Accumold At MD&M East, 2019

Date: June 10, 2019 4:00 AM

Location: NYC

This week, we had the opportunity to exhibit at the  Medical Design & Manufacturing East event in New York City.

On the picture: the Accumold Booth at the MDM EAST with Shawn Thibeault, Sr. Sales Engineer and Aaron Johnson, Vice President of Marketing & Customer Strategy.

Medical Design & Manufacturing (MD&M) East is the largest and longest-running medtech event on the east coast.
Medical device engineers, R&D managers, and executives from across the Northeast and beyond rely on this event
to stay on top of the latest industry advancements, including first looks at innovations yet to hit the market.
Accumold is a high-tech manufacturer of precision micro, small and lead frame injection molded plastic components.
Utilizing processes developed from our Micro-Mold(r) technology, we design, build and produce unique molds and parts efficiently for a variety of markets that include Micro Electronics, Optics and Medical.

Like many great start-ups, Accumold  began operations in a rented garage.
Our founders discovered there was a growing need to manufacture small and micro injection molded components that went
well-beyond the available molding systems of the day. This discovery led to the invention of our first Micro-Mold(r) platform in 1985
Accumold has traveled all around the world attending trade shows and showing why we are a leader in precision micro,
small and lead frame injection molded plastic components.
The MDM EAST show was a great success, our next event will be in Germany.
Show More Show less
Elesa ELECOLOR® machine tool components

Jun 7 2019

Press release

Elesa ELECOLOR® machine tool components

Date: June 7, 2019 11:10 AM

The Elesa ELECOLOR® program offers corporate compatibility for machine tools and other OEM machinery. For example - Top Automazioni, a mechanical company based in Poggio Torriana (Rimini – Italy), is today the most innovative company in Italy in the production of bar feeders. To assist them in maintaining this leadership Top Automazioni have chosen a selection of Elesa standard components with yellow inserts to represent its corporate colour, as well as to improve the aesthetics of its range of machines.
 
There seems to be a growing demand for components with coloured inserts or fully coloured, led by manufacturing industries who are seeking to develop machineries which are not only functional, but also have a modern design look and feel. The proven design styling and high technical quality of Elesa components combine in the ELECOLOR® program to meet this demand. It is a series that includes Elesa’s wide selection of standard machine elements with coloured inserts – for example, VCT., VCT.SOFT, ELK., ESN., EWN., EWN-SST-p-P and MBT., clamping elements which now also feature a new May Green colour option.
 
Among its over 40,000 product codes available in stock, Elesa offers an extensive selection of standard components in the ELECOLORS® range of orange, grey, yellow, blue, red, green and black. This includes their high-end handwheels, tubular handles, thumb screws, lobe knobs and clamping levers.
 
Show More Show less
Value Added Services

Jun 6 2019

New service

Value Added Services

Date: June 6, 2019 5:00 AM

Our Value Added Department provides a wide range of additional services to make sure you get the hinge you need, including:
  • Cut-to-length
  • Hole Punching
  • Swaging & Bending/Forming
  • Pem Nut Installation
  • In-house Degreasing
  • Part Number Stamping & Labeling
Show More Show less
2019 Seminar with Eco-friendly Packaging Experts in Jeju

Jun 4 2019

Participate in an event

2019 Seminar with Eco-friendly Packaging Experts in Jeju

Date: June 4, 2019 3:00 PM

Location: Jeju

Bio Polymer Co. was invited to Seminar with Eco-friendly Packaging Experts
  • Date : June 5th, 2019
Show More Show less
2019 Gwangju Business Week

Jun 4 2019

New product

2019 Gwangju Business Week

Date: June 4, 2019 3:00 PM

New Southern Country

Jun 2 2019

Participate in an event

New Southern Country

Date: June 2, 2019 3:00 PM

Chungcheong Daily News-Participation in Myanmar Trade Mission
Show More Show less
Back to top