What’s new on the B2B Market?
In this way, Albero consolidates even more, if possible, in the sector of sheet metal processing by offering a service of clear added value.
Nov 27 2018
Date: November 27, 2018 10:59 PM
Location: Nuremberg, Germany
Nov 27 2018
Date: November 27, 2018 8:00 AM
In passenger aircrafts, small electric motors are taking over many tasks that used to be performed mechanically or hydraulically. This is a rapidly growing trend. Welcome on board!
Air travel has become more and more common over the years with usage increasing annually. Prices are at a record low, and planes are becoming even more efficient – in part due to electric drive systems, which are replacing the old hydraulic systems. Several hundred drive systems are installed in every modern long-haul airliner these days. In the latest issue of our driven magazine, we show you where they are and how they work... read more
Olten, Switzerland, November 2018 – EAO offers intuitive, reliable and robust safety switches for the machinery industry: The intuitive Series 84 emergency stop and stop switches are particularly suitable for handheld and compact control units, where very low back panel depth is critical and where the front of panel height as well as ergonomic styling are important design factors.
- Industrial or process automation equipment
- Machinery, in particular for handheld control units
- Material handling and lifting platforms
- Medical devices
Installed directly on the machine or in a handheld control unit, these switches reliably protect humans from injury and machines from damage.
- Robust mono-block with a foolproof and fail-safe design
- Very low back panel depth
- Attractive, modern design and protection IP65/67
- Reliable and long service life
- Clearly visible illumination
LED illumination gives additional status information and can also be used to locate the switch, even in low ambient light conditions. The robust mono-block construction and a choice of terminals allow easy mounting in modern safety control systems.
Read more on www.eao.com/84-e-stop
Nov 25 2018
Date: November 25, 2018 11:00 PM
These battery packs are installed in two thermal loops - oil and air - and provide automated management and continuous fluid handling and monitoring of a wide range of flows. The primary objective of such thermal loops is to test high-temperature components and thermal storage systems for industrial processes and/or renewable energies.
Industrial processes and renewable energies are precisely two of the industries to which Electricfor's product catalogue is addressed, offering in each of its projects the safety, development and necessary maintenance to carry them out successfully.
For further information about this type of electric batteries designed and manufactured by Electricfor, please contact its sales department.
The RE.F2-N castors and wheels are suitable for tiled or cement-resin floors. With a robust pressure die cast aluminium wheel body they provide a capacity of up to 2000N – well suited to light industrial carriages, continuously moving equipment, transfer stillages and instrument mounting trollies.
These soft wheeled castors use robust plated steel carriage brackets with fixed, swivel and swivel-with-brake options.
Further information regarding Elesa polyurethane castors may be found at: www.elesa.com/en/elesab2bstoreuk/polyurethane-wheels--1 or follow them on twitter: www.twitter.com/ElesaUK.
Nov 22 2018
Date: November 22, 2018 8:00 AM
In just a few days, the InSight probe will land on Mars to shed new light on the formation of rocky planets. The mission entails driving a measuring probe five meters deep into the Martian ground. maxon engineers pulled out all the stops to make their motor fit for the job.
Tension is mounting among fans of space exploration, as the robotic InSight probe is scheduled to land on Mars on November 26. If all goes according to plan, the stationary lander will proceed to carry out various measurements over a period of two years and provide important insights into Mars and the formation of Earth. The mission is being conducted by the Jet Propulsion Laboratory (JPL) for NASA... read more
Nov 21 2018
Date: November 21, 2018 11:00 PM
Production of slit strip and blanks in hot-rolled,
coldrolled and surface-finished versions as well as aluminium,
stainless steel and electrical stee
This is the largest industry event in Portugal and one of the main in Europe, was visited by businessmen from all over the world and as it should be, the SOMIRAV SA - TEKNIFORCE service, a referral service in the handling sector industrial machinery was open door to get to know both traditional and new industry trends.
Some of the novelties presented were:
- The new autogrúa with capacity of 200 tons
- Truck 22 tons and dimensions extremely reduced
- Cranes Official representation for Truck Effer in Portugal (service TEKNIEFFER)
" In our DNA is the mission of creating Custom-made solutions in highly complex sites through joint know-how and innovative equipment, which makes us unique!"
Nov 20 2018
Date: November 20, 2018 7:00 AM
With the KBS 075, Föhrenbach adds a particularly compact solution to its product range of motorized precision slides with spindle drive. With a guide unit of 75 mm width, it is in particular suitable for simple guide and assembly tasks. It offers all reliable technical advantages of this series and through the modular-type system it opens up to the greatest possible flexibility regarding configuration of implementations, which are perfectly tailored for each application; functionally and in price.
Optimal force absorption of shaft support
The characteristic design feature of the precision slides with ball bushing guides is the V- shape of the shaft support. This is the result of a long-standing application oriented development work at Föhrenbach. Through the V-shape the forces acting on the guide unit are optimally absorbed, which results in an optimal capacity for torque and tensile load of the guide, regardless of the current loading direction. This particular compact construction allows mechanical engineers, where applicable, to use a smaller and thereby more cost-effective unit and thereby saving valuable installation space inside the machine.
Custom-fit modular system-type axis systems
KBS 075 is part of the convenient Föhrenbach-Modular-Systems which comprises of precision slides with different types of guides, construction sizes and slide lengths, each with different strokes. The guide units can easily and cost-effective be combined directly, or with standard angles, to versatile 2-, 3- and multi axis systems.
The slide is driven by precision ball screw spindle drives with pitches of 2 and 5 mm. Strokes are available from 25 up to 300mm.The motor can be disassembled axially over the flange and coupling or over the lateral mounted belt drive. The transmission ratio of the spindle is 1:1. According to our customers need, the use of different motor types is possible.
From this extensive range of product versions and construction sizes, machine designers can configure exactly the axis system, which meets the exact requirements in functionality and dimension of the respective machine application.
Nov 19 2018
Date: November 19, 2018 6:00 AM
¾, 1-1/16, 1-1/4, 1-1/2, 2
Metal Thickness: 0.035” [20 gauge, 89mm]
Pin Diameter: 0.085" [2.16mm]
Knuckle Length: 0.25" [6.35mm]
Available Metals: Plain Steel, Stainless Steel
Standard Lengths: 6' [1829.80mm] and 8' [2438.40mm]
General use metal cabinets and boxes
Mechanics’ drawer and chest and rack tool boxes
Metal first aid kits
Overhead recessed lighting fixtures
Power hand tool storage boxes
Small parts storage cabinets
Airline ground equipment
We can customize our stock # 400 series hinges by performing value-added fabrications such as hole punching, bending, forming, swaging, and pin staking.
October 23, 2018 – Vicor Corporation (NASDAQ: VICR) has announced a 3-phase, AC-DC converter module (“RFM”), capable of delivering 10kW of regulated 48VDCin a power tablet configuration measuring 9.4 x 5.9 x 0.6in (24 x 15 x 1.5cm). The RFM provides a power-factor-corrected, regulated, and isolated DC output with integrated filtering and built-in fault protection for redundant operation. The RFM can be configured to accept worldwide 3-phase AC mains from 200 to 480VAC.
The low-profile power tablet design of the RFM enables unprecedented power density and thermal management flexibility. For example, four RFMs in parallel, including input-disconnect circuitry, rectification and hold-up energy storage at 48V, can supply 40kW of power within 1U of rack space. The RFM power tablet package provides adept thermal management for advanced cooling, including liquid cooling, of high-power server racks for demanding HPC and AI inference and learning applications.
48V (including 54VDC) distribution is the emerging standard in high-power racks utilising smaller-gauge wiring, and achieving substantially lower distribution losses, than legacy 12VDC distribution. In combination with Vicor 48V Power-on-Package (“PoP”) and 48V Direct-to-PoL solutions, the RFM enables dense and efficient end-to-end power system solutions, from 3-phase AC to sub-1V AI processors at the point-of-load.
The 10kW power tablet RFM is the first in a new series of single and 3-phase AC-DC modules featuring power outputs from 150W to 15kW.
Learn more about the Vicor RFM power tablet.
The largest national event dedicated to business internationalization
The internationalization of companies, especially SMEs, with the aim of expanding the national export base.
For the training and strengthening of the exporting skills of companies with a view to diversifying export markets.
The relationship with partners and with export support entities
- Knowing the tools available to support export and internationalization;
- Access extensive information and specialized markets, sectors and other issues related to the internationalization;
- Meet in direct speech the internationalization of Portuguese companies experience, successes and failures;
- Access a wide range of products and services;
- Identify potential partners and establish and strengthen personal contacts generating conditions for each company develop its best strategy to face the challenges of globalization.
81 - 一般贸易商，百货店和零售商店 30'4327
80 - 商业服务 11'0666
23 - 卫生，医疗和制药 9'7729
78 - 住宿、旅游、酒店和餐饮服务业 8'1650
71 - 建筑工业 7'2832
82 - 金融和保险服务 4'7194
88 - 社会护理，个人服务 4'2916
86 - 教育和培训 3'6141
66 - 运输设备 3'4152
75 - 运输和物流服务 3'0922
手机/微信：135 209 85 191
传真：010 6424 8806
Nov 13 2018
Date: November 13, 2018 12:00 AM
This multi-tasking machine offers 5 different processing options in one machine: pulping or blending; coarse or fine purée; hot or cold ingredients; wet or dry ingredients and rejection of unwanted plant matter or injection of water, steam or inert gas.
By eliminating peeling and chopping operations and by continuously removing unwanted fibres, skin particles and seeds to produce an homogenous, puréed product processing steps and product handling are reduced to deliver a higher quality, fine textured, end product.
Garlic, root ginger, tomatoes, onions, oranges and vanilla pods can all be pulped and puréed using the Micron Angle Disintegrator with reject material ejected through a secondary outlet to leave a pristine, homogenous purée. Selection of coarse to fine end product are easily achieved by the changing of removable screens.
Capable of handling dry or soaked ingredients the Angle Disintegrator is equipped with a water injection system making it suitable for continuous mixing and blending – the option to inject steam or inert gas during operation is also possible.
With a capacity to handle up to 3000kg/hour of either wet or dry, hot or cold products the hygienic construction enables fast product changeover without cross contamination.
Nov 13 2018
Date: November 13, 2018 12:00 AM
The simple to use Viblette VBL-F offers sieving times a third less than conventional sieving methods whilst using only 1/6th the liquid to produce accurate and reproducible particle size analysis required in quality control operations. The unit offers a 5 micron, non-filming screen wet sieving capability.
Wet sieving is an established method where cohesive or highly electrostatic powders are to be analysed and where small amounts of coarse powders are to be isolated – which is difficult to detect by laser diffraction- scattering methods or dry sieving.
Enhanced vibration allows rapid analysis and unique shower nozzles deliver effective powder wetting with little liquid waste. Liquid is sprayed through shower nozzles onto the powdery sample on the sieve. The sprinkler is rotated by liquid pressure evenly wetting the powder. The problem of fine screen filming that can occur in wet sieving is avoided using enhanced vibration force, allowing both fine particles and liquid to pass through the screen and shortening the measuring time. Manual intervention is not required during sieving.
Options are available for ultrasonic operation for high cohesive, superfine powders; for organic solvents as well as a series of control options of spray timing, flow volume, rotational speed of sprinkler, process time and vibration on/off timing.
Typical powder applications include, carbon black, calcium carbonate, graphite, silica, plastic, food, abrasives, ceramic fine powders.
Nov 9 2018
Date: November 9, 2018 8:00 AM
After two years of construction, maxon motor ag opened its new Innovation Center at the headquarters in Sachseln, Switzerland. This new innovation center will house the production of microdrives for the medical technology industry. The drive specialist is also taking a look back at its storied past with the release of a new book.
Swiss drive specialist maxon motor is adding another chapter to its ongoing success story: On Friday, November 9, 2018, the new Innovation Center opened at the company‘s headquarters in Sachseln, Switzerland. The new building will provide an environment for the focused collaboration of various research and development departments. The six-story building also offers space for the significantly expanded production of microdrives for use in medical technology. These drives are used in insulin pumps, medication delivery systems, or surgical robots. In order to fulfill the highest quality standards, maxon is integrating state-of-the-art cleanrooms into its production. With these expansions and upgrades, maxon is ready for future growth... read more
Nov 8 2018
Date: November 8, 2018 11:00 PM